[vc_column_text pb_margin_bottom=”no” pb_border_bottom=”no” width=”3/4″ el_position=”first”]

COOLING COIL RCS

[/vc_column_text] [vc_column_text pb_margin_bottom=”no” pb_border_bottom=”no” width=”1/4″ el_position=”last”]

[/vc_column_text]

[vc_column_text pb_margin_bottom=”no” pb_border_bottom=”no” width=”1/3″ el_position=”first”]

rcs_z

[/vc_column_text] [vc_column_text pb_margin_bottom=”no” pb_border_bottom=”no” width=”2/3″ el_position=”last”]

General Features

RCS range unit coolers have been designed to be installed inside cold rooms.
Their shape, being extremely compact, allows the installation also in cold rooms having very small dimensions.
RCS range is available in 3 different fin spacing (4mm,6mm,8mm,) each of them featured by 2 different rows, specific for any applications needed.
All models have been designed with a 37.5×32.5 geometry and a 12 mm tube.
The ED version is fitted with defrosting heaters and is suitable for being used at low temperature applications.
The fan motors operate in the suction mode and prevent the condensate forming on the fan.

[/vc_column_text]
[vc_column_text pb_margin_bottom=”no” pb_border_bottom=”no” width=”1/1″ el_position=”first last”]

Coil

The coil is made of aluminium fins, 12 mm copper tube and a geometry of 37.5×32.5.
RCS unit coolers and be classified in three groups according to the needed cold room temperature (Tc) : 4 mm fin spacing for a Tc from -5 C to +12 C ; 6mm fin spacing for a Tc from -20 C to +10 C; 8mm fin spacing for a Tc from -35 C to +45 C
Each fin spacing group is also available with 4 and 6 rows.
The coil are tested with nitrogen at a pressure of 25 bar.

[/vc_column_text] [vc_column_text pb_margin_bottom=”no” pb_border_bottom=”no” width=”1/1″ el_position=”first last”]

Fan motor

The fan motor model in use has the following features :
* not wired
* double speed (1040-1310 Rpm)
* Manufactured following EN 60 335-1 laws with internal thermal protection
* Fan diameter 500 mm. external rotor
* Power supply 400V / 3 / 50-60 Hz with two different wiring options: DELTA (1310 RPM) and STAR (1040 RPM)
* IP 54 protection rate
* Operating temperature from -40 C to + 40 C
* Electrics made in conformity with 73/23 CEE for low-tension motors

[/vc_column_text] [vc_column_text pb_margin_bottom=”no” pb_border_bottom=”no” width=”1/1″ el_position=”first last”]

Housing

The housing is made of aluminium. The manufacturing solution used give the housing strength and guarantees
the absence of vibration during the functioning. Screws, washers and nuts are made of stainless steel.

 

rcs_1

 

lato collegamento elettrico electrical connection side

 

rcs_2

 

lato collegamento frigorifero pipe connection side

[/vc_column_text]