[vc_column_text pb_margin_bottom=”no” pb_border_bottom=”no” width=”3/4″ el_position=”first”]

 

BLOCK SYSTEM ST

[/vc_column_text] [vc_column_text pb_margin_bottom=”no” pb_border_bottom=”no” width=”1/4″ el_position=”last”]

[/vc_column_text]

[vc_column_text pb_margin_bottom=”no” pb_border_bottom=”no” width=”1/1″ el_position=”first last”]

The Block System is a complete refrigerating system contained in one housing, consisting of a condensing unit, evaporator and an electrical control panel. This solution enable the product to be easily installed, with compact overall dimensions and reduced maintenance costs.

In these machines the condensing unit , which is to be installed on the external side of the cold room walls,is separated from the evaporator, to be installed internally. this enables the two items to be installed a certain distance form each other. this solution grants an easy and fast installation both on the floor and on the roof this range is available in two different versions: nitrogen-charged with shut-off valve connections for all models or where available. Pre-charge refrigerant and fast connection (ST/R) In this case it is possible to request the supply of pre-charged connection pipes (for additional details see the optional table related each model) ceiling mounted evaporator. Thermostatic valve or capillary expansion.

Heater of ventilation defrosting. ST models are equipped with remote control panel (10 m long cable)

[/vc_column_text] [vc_column_text pb_margin_bottom=”no” pb_border_bottom=”no” width=”1/4″ el_position=”first”]

bs_st1

 

bs_st2

 

[/vc_column_text] [vc_column_text pb_margin_bottom=”no” pb_border_bottom=”no” width=”3/4″ el_position=”last”]

  • Self-supporting casing in zinc-plated metal sheet. which is coated with epoxy powder and easily removable
    panels for fast access to components during inspection or maintenance operations;
  • Hermetic or semi hermetic compressors with thermal motor protections :
  • Heat ex-changers with aluminium fins and cooper coils
  • Direct gas expansion with capillary tube or thermostatic expansion valve (optional where not fitted as standard)
  • Air cooled condenser (optional condensation by water) :
  • Automatic defrosting with programmable run, duration and frequency setting;
  • Integral evaporating condensing water tray, of condensing water direct discharge;
  • Electronic board that can be programmed according to different user requirements
  • Integral or remote control panel (optional where not fitted as standard);
  • Additional electronic module for master/slave operation (optional) ;
  • Additional electronic module for monitoring . recording and remote management (optional);
  • Remote management system (optional).
[/vc_column_text] [vc_column_text pb_margin_bottom=”no” pb_border_bottom=”no” width=”1/1″ el_position=”first last”]

The quality of the components used, the care of the assembling process and severe inspection test guarantee a highly reliable and safe product.

Block systems are available for the following application fields:

High Temperature (HBP)+10C/+2C

Medium Temperature (MBP)+5C/-5C

Low Temperature (LBP)-15C/-25C

[/vc_column_text]